Here's the supply list to get you started:
Supplies Needed
- Table saw
- Sheet of 1/2 x 48 x 96-inch AB plywood
- (5) 2 x 4 x 96-inch plywood boards
- Tape measure
- Compass
- Pencil
- Jigsaw
- Wood clamps
- Miter saw
- Sandpaper and/or router
- Tack cloth
- Power drill with bits (Philips, pilot, and 3/8-inch)
- 3-inch deck screws
- Wood putty
- Putty knife
- Wood glue
- Nail gun with nails
- Primer
- Paintbrush or foam roller
- Paint
- (4) 1/8-inch wood shim
- (4) 3/8-inch carriage bolts
- (8) 3/8-inch fender washers
- (8) 3/8-inch lock nuts
Cut List
- Board Long Sides: (4) 1-1/2 x 3 x 47-7/8-inch plywood
- Board Short Sides: (4) 1-1/2 x 3 x 20-7/8-inch plywood
- Leg Connector: (2) 1-1/2 x 3 x 17-5/8-inch plywood
- Legs: (4) 1-1/2 x 3 x 12-5/8-inch plywood
- Board Top: (2) 1/2 x 23-7/8 x 47-7/8-inch plywood
Footer Social Links